Category Archives: electric

Little Lutherie Class on the Prairie: Teaching Guitar Making in a Saskatchewan High School

2020
AL#140 p.52               
Glen Friesen                                                                                           

▪ Some public servants take on challenging tasks that many of us would fear to attempt. I’m not talking about fire fighters or the people who change light bulbs on the tops of suspension bridges. I’m talking about high school shop teachers. And here’s a guy who has been teaching guitar making in public school for twenty years. Hats off to you, sir! And respect to the students. These guitars look pretty good.

Delrin Frets

2019
AL#136 p.52               
Harry Fleishman                                                                                           

▪ Many years ago, innovative classical guitar maker Richard Schneider made instruments with frets made of rod stock set in wide saw kerfs. Fleishman updates the idea by having round-bottomed slots cut by CNC and laying in Delrin rod.

Warmoth Guitar Products in the 21st Century

2018
AL#134 p.16               
Tim Olsen                                                                                           

▪ Ken Warmoth is one of the pioneers of the Strat-compatible guitar parts scene, starting small in the 1970s and working up to the sophisticated operation he runs today. He’s a born engineer, constantly refining and rethinking each operation for better accuracy and efficiency. Of course these days that involves CNC machines, and he’s got them. But you may be surprised to see which operations use them and which don’t. Our last visit with Ken was in 1991, so there is some catching up to do.

Let’s Catch up with Harry Fleishman

2018
AL#134 p.42               
Michael Bashkin   Harry Fleishman                                                                                       

▪ Everybody knows Harry Fleishman, right? We first “Met the Maker” in 2001, but by then Harry had already been an active GAL author and convention attendee for some time. Now we are catching up with him. This recent chapter of his story is a doozy, with major moves, businesses opening and closing, fruitful collaborations, international travel, and new beginnings.

Letter to the Editor: Baroque Relief Carving for Electric Bass

2017
AL#132 p.3               
Matias Crom                                                                                           

▪ The Guild has always taken the attitude that all lutherie info is good for all luthiers. Here’s a case in point. A Guild member has specialized in electric guitars and in Baroque instruments at different points in his career. He unites those ideas in an electric bass with relief carving based on rosette designs from our landmark book Historical Lute Construction by Robert Lundberg.

In Memoriam: Jim Mouradian

2017
AL#130 p.62               read this article
R.M. Mottola                                                                                           

▪ Jim Mouradian, shown here with his son Jon, ran a guitar repair shop and made electric basses. He was a generous and happy mentor to many.

Electric Bass Neck Rods

2017
AL#131 p.14               
David King                                                                                           

▪ That great big long thin neck of an electric bass is the ultimate test case for a truss rod. When renowned custom bass maker David King became dissatisfied with the performance of the rod he was using, he took a deep dive on the whole question of how rods work. Spoiler: Leo Fender was right. Mentions Michael Gurian and William Cumpiano.

Compression Neck Rod Installation

2017
AL#131 p.18               
David King                                                                                           

▪ If you are one of those spoiled-rotten kids who has always just dropped an under-over truss rod into a straight slot, you might want to see how a real old-school single curved compression rod is done.

Product Reviews: Kahler 2415-CX Tremolo Bass Bridge

2013
AL#114 p.64               
Eron Harding                                                                                           

▪ Eron Harding reviews one of Kahler’s latest bass bridge models, a 5 string trem for P-bass bodies; a solid and well made bridge.

Reviews: Electric Guitar and Electric Bass Design by Leo Lospennato

2012
AL#109 p.61               
Veronica Merryfield                                                                                           

▪ A book aimed at the musician, the hobbyist, and luthier who is open to new ideas; divided into 6 sections on beauty, playability, sound, parts, materials, finishes, and completion.

Reviews: Electric Guitar and Electric Bass Design by Leo Lospennato

2012
AL#109 p.62               
Melanie Heizer                                                                                           

▪ A book aimed at the musician, the hobbyist, and luthier who is open to new ideas; divided into 6 sections on beauty, playability, sound, parts, materials, finishes, and completion.

Electric Bass Design Considerations

2009
AL#99 p.38               
Veronica Merryfield   David Minnieweather   Harry Fleishman                                                                                   

▪ As a panel discussion at the 2008 GAL convention this must have been the one not to miss. As an article it is engaging and intriguing. Why do electric bass makers get to have all this freedom and the rest of us have to make copies of stuff that appeared before we were born? Bass players seem to always have had more open minds than other musicians, and these three authors have certainly pushed the envelope. With 47 photos.

Building for Playability

2009
AL#99 p.7      ALA4 p.52         
David Freeman                                                                                           

▪ Some features of guitar construction make the instrument functional for normal humans and tuneful music making, and getting them wrong can/will destroy the guitars usefulness. Other features aren’t necessary but may make the instrument more comfortable to play or offer extended musical capabilities. Freeman addresses both aspects in this article taken from his 2008 GAL convention workshop. He’s not the least bit shy about reconfiguring the guitar’s shape or features to make musicians better and happier. Whether or not you wish to make such alterations, much of this stuff you better know if you wish to make musical instruments rather than guitar-shaped objects. With 5 photos, 3 charts, and a drawing.

Meet the Maker: David King

2006
AL#85 p.20               
Jonathon Peterson   David King                                                                                       

▪ King is a perfectionist who even machines his own bridges. The finish he uses is a catalyzed polyurethane. He uses some interesting equipment to arch his fingerboards and install his frets. After reading this you may not be eager to set up next to him at an instrument show. With 15 photos.

Meet the Maker: Jay Hargreaves

2005
AL#83 p.44   BRB7 p.380            
Todd Rose   Jay Hargreaves                                                                                       

▪ Bass maker Hargreaves is hardly a stranger to AL readers. Here he stands on the other end of the interview as he discusses his work as well as his affiliations with Michael Kasha and Richard Schneider.

A Lightweight Electric Bass

2004
AL#78 p.51   BRB7 p.220            
R.M. Mottola                                                                                           

▪ A couple decades ago electric musicians believed that the only way to get good sustain and tone was by playing a heavy guitar or bass. Guitarists gave up on this a few years ago, but bass players have been slower to go light. The author specializes in bass instruments, and the design he includes here weighs less than six pounds while surrendering precious little to much heavier bass guitars With 4 photos and 2 diagrams.

Audio Spectroscopy

2002
AL#70 p.44   BRB6 p.365            
R.M. Mottola                                                                                           

▪ With digital recording and spectrographic analysis software a computer can print out a diagram of an instrument’s tone spectrum, reducing the complicated issue of tone comparison to easy-to-read graphs. The scientifically inclined luthier may find that this helps him build better instruments, while others may decide that it’s another case of too much information. If you’ve found that intuition has carried you as far as it can you might check out the usefulness of “tone pictures”. With 5 bass guitar spectrographs.

Meet the Maker: David Minnieweather

2001
AL#67 p.34   BRB6 p.206            
Jonathon Peterson   David Minnieweather                                                                                       

▪ Minnieweather lives in Oregon and makes some fine-looking electric basses, including a stunning electric upright. With 9 photos.

Meet the Maker: Harry Fleishman

2001
AL#66 p.6   BRB6 p.186            
Ken Goodwin   Harry Fleishman                                                                                       

▪ Fleishman has been a guitar and bass designer/builder, a teacher of lutherie and writing, a longtime member of the GAL, a frequent contributor to AL and its current product reviewer. Harry is as well-known for his outrageous sense of humor as for the outrageous instruments he creates. With 10 photos.

Product Reviews: Hipshot Ultralight Bass Tuners

2000
AL#64 p.61   BRB6 p.476            
Harry Fleishman                                                                                           

▪ Fleishman returns to this column after a long absence, and finds that he has a strong admiration for Hipshot Ultralight Bass Tuners. He also examines the Earvana intonated nut intended for Fender electric guitars and finds that they do improve intonation, though the installation is not a piece of cake. With 3 photos.

Letter to the Editor: Oversize Bass

1998
AL#56 p.3               
Derrick McCandless                                                                                           

▪ McCandless built a functioning P/J bass that is 8′ long and otherwise to scale. With 1 photo of the finished instrument.

Review: Easy Guitar Maintenance and Repair by Harvey Citron

1998
AL#54 p.55   BRB5 p.476            
John Calkin                                                                                           

▪ The reviewer finds that this video is a good learning device for anyone wishing to learn how to set up their electric guitar or bass, perhaps less so for acoustic players.

Meet the Maker: Bishop Cochran

1996
AL#48 p.14   BRB4 p.386            
Jonathon Peterson   Bishop Cochran                                                                                       

▪ Cochran is a player/maker of electric and acoustic/electric guitars who uses machine shop equipment and supplies to create his instruments. The emphasis is on precision work, duplicable procedures, and practical designs. With 26 photos.

Review: Electric Guitars and Basses, a Photographic History by George Gruhn and Walter Carter

1995
AL#42 p.56   BRB4 p.465            
John Calkin                                                                                           

▪ The reviewer is enthusiastic about this picture book but decides that it may have no relevance to the life of a typical luthier.

Review: The Physics of Musical Instruments by Neville H. Fletcher and Tom Rossing

1995
AL#42 p.57   BRB4 p.466            
Don Bradley                                                                                           

▪ The reviewer finds that the authors have made an invaluable reference for studying the vibration of all types of musical instruments.

Electronic Answer Man

1994
AL#40 p.54   BRB4 p.416            
Rick Turner                                                                                           

▪ Have you got a new idea about wiring a guitar or bass? Turner helps you decide if it may be worth the effort of trying it out. The fact that a new wiring system will work doesn’t mean anyone will want to hear it. Or buy it. Or care at all.

Electronic Answer Man

1994
AL#37 p.56   BRB4 p.416            
Rick Turner                                                                                           

▪ Turner’s column is all about the essential electronic measuring instruments for the guitar shop.

Electronic Answer Man

1993
AL#36 p.56   BRB3 p.426            read this article
Rick Turner                                                                                           

▪ Turner warns repairmen not to get in over their heads with custom electronics work, and describes two elaborate jobs that came out right for all concerned.

Taking the Guitar Beyond Equal Temperament

1992
AL#30 p.56   BRB3 p.469            
Curt Carpenter                                                                                           

▪ The reviewer is disappointed in the chapters about pickup making. The rest of the book is hard to follow and perhaps too deep for beginning luthiers. The book does offer food for thought, but should be used in conjunction with other references.

Electronic Answer Man

1992
AL#29 p.54   BRB3 p.426            read this article
Rick Turner                                                                                           

▪ A new column is born. What is pickup phase and polarity? Why do positions 2 and 4 on a 5-way Strat switch sound funky? Turner knows and tells all.

Inside Warmoth Guitar Products

1991
AL#26 p.26   BRB3 p.60            
Ken Warmoth                                                                                           

▪ Most in-the-know electric guitar folks consider Warmoth necks and bodies to be the best going. Here’s how they’re made. With 22 photos.

This article has been nominated as one of the Guild’s best articles published before 2010.

Letter to the Editor: Gittler Guitar

1989
AL#19 p.5               read this article
Anthony D. Blokzyi                                                                                           

▪ Blokzyi furnishes a description of the Gittler guitar, an all stainless steel, skeletonized instrument.

Position Markers For Fretless Bass

1979
DS#123               
Leo Bidne                                                                                           

▪ The fretless bass, unlike the vertical standing double bass, is played horizontally and the long, slim neck is too wide for ‘sighting’ down the neck, thus a system of marking is necessary.