Category Archives: tuners

Let’s Catch Up with Steve Klein

2023
AL#148 p.16               
Paul Schmidt   Steve Klein                                                                                       

▪ Steve Klein started his lutherie endeavors fifty-five years ago as a teenager in his parents’ house. Today he’s collaborating with Steve Kauffman on dazzlingly decorative acoustic guitars, and continuing to make innovative ergonomic solidbodies in his own shop. Mentions Fibonacci, Carl Margolis, Frank Pollaro, Leonardo DaVinci Steve Kauffman, Larry Robinson, Bob Hergert, Joe Walsh.

Seeking the Holy Grail: Torres’ FE08

2021
AL#143 p.6               
Federico Sheppard                                                                                           

▪ It is a story of mystery, dedication, and destiny. The wide-eyed young novitiate is mentored by oracles, sorcerers, and craftsmen until he finds his great quest and pursues it against all odds. To put it more plainly, but no more truthfully, it is the story of Federico Sheppard constructing a copy of FE08, the astonishingly elaborate early opus of the master luthier Antonio Torres Jurado. Mentions Nick Kukich, Ray Jacobs, Shel Urlik, Jose Romanillos, Richard Brune, Robert Ruck, Robert Lundberg, Abel Garcia Lopez, Nicolo Alessi.

The $75 Guitar Challenge

2021
AL#142 p.40               
Doug Hunt   Mark French                                                                                       

▪ Two luthiers dare each other to make a useful guitar for a total investment of $75 each. One makes a flattop, the other a solid body. There are rules, and rules are meant to be broken.

When Does “Replica” Become “Inspired By?”

2020
AL#140 p.62               
C.F. Casey                                                                                           

▪ Nearly twenty years ago, Casey made a detailed drawing of a 7-string Russian guitar which we published as GAL Instrument Plan #48. Recently, he was called on to make a replica of that instrument. Sure, he had the drawing, but he took a few liberties with the project. He tells us what he did, and why. The original guitar showed some Stauffer inspiration.

Travel Guitar with In-Body Tuning System

2018
AL#133 p.40               
John Armstrong                                                                                           

▪ Many different designs have addressed the problem of making a travel guitar with a full scale length. Here’s one that solves the problem by completely redesigning the tuning mechanism so that it can fit into the body behind the bridge.

Product Reviews: Knilling Perfection Planetary Pegs

2009
AL#100 p.58               read this article
Randy DeBey                                                                                           

▪ DeBey reviews a set of Knilling Perfection Planetary pegs (geared tuning pegs) designed by John Charles Herin.

Historical Influences in a Modern Guitar Design

2009
AL#100 p.6      ALA5 p.60         
Gary Southwell                                                                                           

▪ Southwell on using historical influences in contemporary work and design. From his 2006 GAL convention lecture.

Peg Shapers That You Can Adjust

2008
AL#96 p.58               
David Golber                                                                                           

▪ The author got tired of hard-to-use commercial peg shapers, so he made a better one of his own. He describes it as a tool for actual human beings. With 6 photos and a drawing.

Product Reviews: Mandolin tuners

2008
AL#93 p.60               
James Condino                                                                                           

▪ Condino rates all the commonly available mandolin tuners and explains why spending $500 for the best set available might make good economic sense. He also likes the Stew-Mac mandolin peghead drill jig. With 12 photos.

Product Reviews: Slotted-Head Tuners

2004
AL#79 p.48   BRB7 p.516            
Todd Rose                                                                                           

▪ Slot-heads have been standard on classical guitars since they evolved away from wooden friction pegs, but that elegant design has appeared only intermittently on steel string guitars. Noting a comeback in the steel string slot-head, the author examines and evaluates many of the various tuners available, from the basic to the sublime. With 19 photos and list of sources.

Letter to the Editor: Sloane Bass Tuners

2001
AL#66 p.3               read this article
Frederick C. Lyman Jr.                                                                                           

▪ Longtime GAL member Fred Lyman tells of the conversation that got Irving Sloane interested in making bass machines. Fred also gives a quick overview of his life in lutherie and wishes more lutherie info had been available to him in his youth.

Product Reviews: Hipshot Ultralight Bass Tuners

2000
AL#64 p.61   BRB6 p.476            
Harry Fleishman                                                                                           

▪ Fleishman returns to this column after a long absence, and finds that he has a strong admiration for Hipshot Ultralight Bass Tuners. He also examines the Earvana intonated nut intended for Fender electric guitars and finds that they do improve intonation, though the installation is not a piece of cake. With 3 photos.

In Memoriam: Irving Sloane

1998
AL#55 p.3   BRB5 p.213            read this article
Roger Sadowsky                                                                                           

▪ Sadowsky remembers Irving Sloane as a Renaissance man, and surely just the work he did in the lutherie field would qualify him for that. He designed and produced tuning machines, a slew of hand tools, and three instruction books that no doubt continue to be the worthy introduction many of us have to the world of lutherie. He was also Sadowsky’s father-in-law. This small remembrance is as nice as any man has had.

Sources: Tools and Hardware

1996
AL#47 p.62               
Cyndy Burton                                                                                           

▪ A page of tools especially for the luthier, and a page and a half of tools and supplies of a more general nature. Where to get your tools. Or, at least, where to get your catalogs.

Meet the Makers: Klaus and Peppe Reischel

1995
AL#42 p.42   BRB4 p.188            
David Riggs   Klaus Reischel   Peppe Reischel                                                                                   

▪ The Reischels make Landstrofer tuners, high-quality German gears for classical guitars.

Product Reviews: Trem-Setter and Tuning Gizmos

1993
AL#36 p.60   BRB3 p.441            
Harry Fleishman                                                                                           

▪ Toolman tries out the Hipshot Extender Key for guitars, and the Hipshot Trilogy bridge. He finds them to be useful products with specific uses.

Product Reviews: Sperzels and Waverlies

1993
AL#35 p.54   BRB3 p.441            
Harry Fleishman                                                                                           

▪ The Guild’s resident tool and hardware tester takes a look at Waverly vintage-style tuners, Sperzel locking machine heads, and the Trem-Setter stabilizing device. All are given the nod of approval.

A New Look at Harp Guitars

1993
AL#34 p.24   BRB3 p.334   ALA6 p.30         
Jonathon Peterson                                                                                           

▪ In AL#29 Peterson looked back at the harp guitar. This time he takes a forward look. A number of luthiers find fascination and a new potential in the big beast, and this is the best look at their results to date. With 28 photos and 8 detailed drawings. Also available is GAL full-scale Plan #34, the Klein solidbody electric harp guitar.

This article has been nominated as one of the Guild’s best articles published before 2010.

Shortening Schaller Shafts

1993
AL#33 p.46   BRB3 p.310            read this article
David Golber                                                                                           

▪ If stock tuners stick up too far from the top of your headstock you can fix them, but it requires a machinist’s lathe.

The Portuguese Guitarra: A Modern Cittern

1991
AL#27 p.34   BRB3 p.108            read this article
Ronald Louis Fernandez                                                                                           

▪ This instrument is a lovely looking cittern, sort of a big mandolin with 12 strings. The traditional tuners are unique, compact, and distinctly ungraceful, but they allow—indeed, encourage—the use of a wonderfully distinctive headstock. With 16 photos.

Screw Misc.

1985
AL#3 p.41               
Chris Pile   Tim Earls                                                                                       

▪ Pile contends that Schaller and Badass hardware comes with inferior screws, and that the good screws that come with cheaper machine heads should be swapped for them. Mr. Earls offers a method of cleaning bolt threads after cutting the bolt.

Remembering Hermann Hauser II

1983
GALQ Vol.11#3 p.10   BRB2 p.154            
H.E. Huttig                                                                                           

▪ The author visited Hauser in Germany in 1966. This short biography and remembrance adds a bit of humanity to a man who is usually only thought of in terms of the guitars he left behind when he died. With 2 photos.

This article has been nominated as one of the Guild’s best articles published before 2010.

Hammered Dulcimer Tuning Tricks

1983
DS#234   BRB2 p.335            
Edward Damm                                                                                           

▪ Some of these tricks need to be built into the instrument. The others are useful after it’s complete. With hammered dulcimers you need all the tuning help you can get. With 5 drawings.